A CLOSER LOOK AT LASERWELL® PLUS
LaserWell Plus membership cards are a unique combination of materials providing the ultimate membership ID card solution for personalization on high-speed laser printers and digital presses. The high-tech design features a debossed “well” or cavity into which the synthetic plastic membership card is affixed, making the overall document coplanar. This construction means LaserWell Plus membership ID cards run smoothly through high-speed laser printers for jam-free personalization.
LaserWell Plus membership ID cards are manufactured of a recyclable, synthetic plastic card material that makes them long-lasting, heat, tear and water resistant. This robust construction translates to membership cards that require less frequent reprocessing and replacement and cost savings over time. Both the card and document (front and back) can be pre-printed full color to accommodate even the most vibrant of visual designs making LaserWell Plus the premier membership card in the marketplace.
In today’s market, everyone has a wallet full of cards ranging from must-carry personal identification cards to credit cards to a plethora of membership cards. Want your membership card to make it into your customers’ wallets? LaserWell Plus membership cards feature a thin 7 mil card that has no bulk making LaserWell Plus cards more likely to be carried and used.
The membership card’s proprietary toner receptive coating aggressively bonds toner for a sharp durable image
making LaserWell and LaserWell Plus our flagship membership card products.
LASERWELL PLUS FOR CONTINUOUS LASER PRINTING SYSTEMS
LaserWell Plus membership identification cards are also available for imaging on high speed continuous laser printing and publishing systems. For orders over 100M, two wide carrier may improve laser imaging efficiency and reduce manufacturing setup and affixing charges. LaserWell Plus membership ID cards for continuous printers are available in a variety of form sizes to meet your needs. NOTE: Continuous forms are fan folded. Not available on rolls.
LASERWELL PLUS FORMATS
While many of our customers use our standard 1 up LaserWell Plus, up to four membership cards can be affixed to the host document. Custom card positioning is available, provided the card is affixed no closer than 1/2″ from the edge of the sheet. All custom formats must be tested to insure compatibility between particular laser printer and LaserWell Plus format.
1 UP CONTINUOUS
1 UP 2 WIDE
2 UP CONTINUOUS
2 UP 2 WIDE
1 UP SNOWMAN
1 UP SNOWMAN
2 UP SNOWMAN
2 UP SNOWMAN
1 UP BUTTERFLY
1 UP 2 WIDE
2 UP BUTTERFLY
2 UP 2 WIDE
Looking to image variable information on the back of your LaserWell Plus cards? A unique, patented variation of LaserWell Plus membership identification cards, called WindoWell is the answer. A 2 5/8 x 1 3/8 inch “window” is die cut into the form to allow duplex imaging on the backside of the card. WindoWell documents are available in the 1up, and 2up standard formats. WindoWell for duplex imaging on card and document is available in cut sheet format only.
LASERWELL PLUS MEMBERSHIP ID CARDS: COMPATIBLE PRINTERS
LaserWell Plus membership identification cards combine a highly-durable synthetic plastic card and a host document designed to run jam-free through high-speed laser printers and digital presses. Because the card is affixing into a debossed well, the card and document are nearly coplanar. The result is membership card solution that simplifies personalization of large quantities of membership cards in little time.
A printer test is required for all LaserWell membership card orders even if we have found a specific printer make and model to be compatible with LaserWell in the past. A simple test will identify several characteristics that are needed to determine the optimum quality of the imaging on the card and carrier.The test will verify the paper path, toner transfer quality, toner fusion and toner adhesion to the card. All of these checkpoints provide confidence in LaserWell ‘s compatibility with the end customer’s laser printer.
Looking to run LaserWell on slower network or desktop laser printer? See our LaserWell membership cards, specially constructed for use on desktop and network laser printers.
LASERWELL PLUS MEMBERSHIP ID CARDS: SPECIFICATIONS
LaserWell Plus membership cards are a unique combination of a host document and synthetic plastic card affixed within a debossed well. Each document can support up to two standard cards, two Butterfly, two Snowmans or one Caterpillar card per sheet and are available blank or preprinted up to 8 colors including 4-color process.
Likewise, the LaserWell Plus card is available blank or preprinted up to 8 colors including 4-color process. United, the two components make a stunning membership card mailing / marketing piece.
The LaserWell Card
Standard Card: 3 3/8″ X 2 1/8″
Butterfly Card: 6 3/4″ x 2 1/8″
Snowman Card: 3 3/8″ x 4 1/4″
Caterpillar Card: 6 3/8″ x 3 3/8″
Debossed well extends 1/16″ around each card.
7 mil white, matte/matte finish.
Heat, tear and water resistant.
Matte surface is toner and ball point pen receptive.
Printing: Blank to 4CP with maximum of 8 colors.
UV Laser Inks. No metallic inks.
Maximum of 20% ink density in laser image areas.
The LaserWell Host Document
Cut Sheet Sizes:
8 1/2” x 11”
8 1/2″ x 14″
17” x 11”
18″ x 12″
Other custom sizes available
Continuous Form Sizes:
Most standard continuous form sizes are available
80# White Cougar Opaque Smooth Text
100# White Finch Opaque Text
Blank to 4CP PMS. Laser inks. No metallic inks.
Multiple perforations available.
ID CARDS FOR MULTIPLE VERTICAL MARKET APPLICATIONS
FormStore’s laser printable membership ID cards and magnets can be used for a multitude of applications ranging from Insurance and Healthcare ID cards to membership ID cards for educational use, kids’ clubs and member associations. Our ID cards even made good badges. Visit our Creative ID Card Application page to see conceptual mock ups of 50+ popular uses for FormStore’s cards and magnets.